# SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
# SPDX-License-Identifier: MIT

"""
Example showing how the BMP280 library can be used to set the various
parameters supported by the sensor.
Refer to the BMP280 datasheet to understand what these parameters do
"""

import time

import board

import adafruit_bmp280

# Create sensor object, communicating over the board's default I2C bus
i2c = board.I2C()  # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
bmp280 = adafruit_bmp280.Adafruit_BMP280_I2C(i2c)

# OR Create sensor object, communicating over the board's default SPI bus
# spi = busio.SPI()
# bmp_cs = digitalio.DigitalInOut(board.D5)
# bmp280 = adafruit_bmp280.Adafruit_BMP280_SPI(spi, bmp_cs)

# change this to match the location's pressure (hPa) at sea level
bmp280.sea_level_pressure = 1013.25
bmp280.mode = adafruit_bmp280.MODE_NORMAL
bmp280.standby_period = adafruit_bmp280.STANDBY_TC_500
bmp280.iir_filter = adafruit_bmp280.IIR_FILTER_X16
bmp280.overscan_pressure = adafruit_bmp280.OVERSCAN_X16
bmp280.overscan_temperature = adafruit_bmp280.OVERSCAN_X2
# The sensor will need a moment to gather inital readings
time.sleep(1)

while True:
    print(f"\nTemperature: {bmp280.temperature:0.1f} C")
    print(f"Pressure: {bmp280.pressure:0.1f} hPa")
    print(f"Altitude = {bmp280.altitude:0.2f} meters")
    time.sleep(2)