# SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
# SPDX-License-Identifier: MIT

import time

import board

import adafruit_bno055

i2c = board.I2C()  # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
sensor = adafruit_bno055.BNO055_I2C(i2c)

# If you are going to use UART uncomment these lines
# uart = board.UART()
# sensor = adafruit_bno055.BNO055_UART(uart)

last_val = 0xFFFF


def temperature():
    global last_val  # noqa: PLW0603
    result = sensor.temperature
    if abs(result - last_val) == 128:
        result = sensor.temperature
        if abs(result - last_val) == 128:
            return 0b00111111 & result
    last_val = result
    return result


while True:
    print(f"Temperature: {sensor.temperature} degrees C")
    """
    print(
        "Temperature: {} degrees C".format(temperature())
    )  # Uncomment if using a Raspberry Pi
    """
    print(f"Accelerometer (m/s^2): {sensor.acceleration}")
    print(f"Magnetometer (microteslas): {sensor.magnetic}")
    print(f"Gyroscope (rad/sec): {sensor.gyro}")
    print(f"Euler angle: {sensor.euler}")
    print(f"Quaternion: {sensor.quaternion}")
    print(f"Linear acceleration (m/s^2): {sensor.linear_acceleration}")
    print(f"Gravity (m/s^2): {sensor.gravity}")
    print()

    time.sleep(1)