# SPDX-FileCopyrightText: 2021 yeyeto2788 for Adafruit Industries
# SPDX-License-Identifier: MIT

"""
This script let's you check the best timing for you sensor as other people have face timing issues
as seen on issue https://github.com/adafruit/Adafruit_CircuitPython_DHT/issues/66.

By changing the variables values below you will be able to check the best timing for you sensor,
take into account that by most datasheets the timing for the sensor are 0.001 DHT22 and
0.018 for DHT11 which are the default values of the library.
"""

import json
import time

import board

import adafruit_dht

# Change the pin used below
pin_to_use = "PG6"

# Maximum number of tries per timing
max_retries_per_time = 10
# Minimum wait time from where to start testing
min_time = 1500
# Maximum wait time on where to stop testing
max_time = 2000
# Increment on time
time_increment = 100

# Variable to store all reads on a try
reads = {}

initial_msg = f"""
\nInitializing test with the following parameters:

- Maximum retries per waiting time: {max_retries_per_time}
- Start time (ms): {min_time}
- End time (ms): {max_time}
- Increment time (ms): {time_increment}

This execution will try to read the sensor {max_retries_per_time} times
for {len(range(min_time, max_time, time_increment))} different wait times values.

"""
# Print initial message on the console.
print(initial_msg)

for milliseconds in range(min_time, max_time, time_increment):
    # Instantiate the DHT11 object.
    dhtDevice = adafruit_dht.DHT11(pin=getattr(board, pin_to_use))
    # Change the default wait time for triggering the read.
    dhtDevice._trig_wait = milliseconds

    print(f"Using 'trig_wait' of {dhtDevice._trig_wait}")
    # Reset the read count for next loop
    reads_count = 0

    # Create the key on the reads dictionary with the milliseconds used on
    # this try.
    if milliseconds not in reads:
        reads[milliseconds] = {"total_reads": 0}

    for try_number in range(0, max_retries_per_time):
        try:
            # Read temperature and humidity
            temperature = dhtDevice.temperature
            humidity = dhtDevice.humidity
            read_values = {"temperature": temperature, "humidity": humidity}

            if try_number not in reads[milliseconds]:
                reads[milliseconds][try_number] = read_values

            reads_count += 1
        except RuntimeError:
            time.sleep(2)
        else:
            time.sleep(1)

    reads[milliseconds]["total_reads"] = reads_count

    print(f"Total read(s): {reads[milliseconds]['total_reads']}\n")
    dhtDevice.exit()

# Gather the highest read numbers from all reads done.
best_result = max(reads[milliseconds]["total_reads"] for milliseconds in reads)
# Gather best time(s) in milliseconds where we got more reads
best_times = [
    milliseconds for milliseconds in reads if reads[milliseconds]["total_reads"] == best_result
]
print(
    f"Maximum reads: {best_result}  out of {max_retries_per_time} with the "
    f"following times: {', '.join([str(t) for t in best_times])}"
)

# change the value on the line below to see all reads performed.
print_all = False
if print_all:
    print(json.dumps(reads))