# SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
# SPDX-License-Identifier: MIT

# class of sparklines in CircuitPython
# created by Kevin Matocha - Copyright 2020 (C)

# See the bottom for a code example using the `sparkline` Class.

# # File: display_shapes_sparkline.py
# A sparkline is a scrolling line graph, where any values added to sparkline
# using `add_value` are plotted.
#
# The `sparkline` class creates an element suitable for adding to the display
# using `display.root_group = mySparkline` or adding to a `displayio.Group` to be displayed.
#
# When creating the sparkline, identify the number of `max_items` that will be
# included in the graph.
# When additional elements are added to the sparkline and the number of items
# has exceeded max_items, any excess values are removed from the left of the
# graph, and new values are added to the right.


# The following is an example that shows the

# setup display
# instance sparklines
# add to the display
# Loop the following steps:
# 	add new values to sparkline `add_value`
# 	update the sparklines `update`

import random
import time

import board
import displayio
import fourwire
import terminalio
from adafruit_display_text import label

from adafruit_display_shapes.line import Line
from adafruit_display_shapes.rect import Rect
from adafruit_display_shapes.sparkline import Sparkline

if "DISPLAY" not in dir(board):
    # Setup the LCD display with driver
    # You may need to change this to match the display driver for the chipset
    # used on your display
    from adafruit_ili9341 import ILI9341

    displayio.release_displays()

    # setup the SPI bus
    spi = board.SPI()
    tft_cs = board.D9  # arbitrary, pin not used
    tft_dc = board.D10
    tft_backlight = board.D12
    tft_reset = board.D11

    while not spi.try_lock():
        spi.configure(baudrate=32000000)
    spi.unlock()

    display_bus = fourwire.FourWire(
        spi,
        command=tft_dc,
        chip_select=tft_cs,
        reset=tft_reset,
        baudrate=32000000,
        polarity=1,
        phase=1,
    )

    print(f"spi.frequency: {spi.frequency}")

    # Number of pixels in the display
    DISPLAY_WIDTH = 320
    DISPLAY_HEIGHT = 240

    # create the display
    display = ILI9341(
        display_bus,
        width=DISPLAY_WIDTH,
        height=DISPLAY_HEIGHT,
        rotation=180,  # The rotation can be adjusted to match your configuration.
        auto_refresh=True,
        native_frames_per_second=90,
    )

    # reset the display to show nothing.
    display.root_group = None
else:
    # built-in display
    display = board.DISPLAY

##########################################
# Create background bitmaps and sparklines
##########################################

# Baseline size of the sparkline chart, in pixels.
chart_width = display.width - 50
chart_height = display.height - 50

font = terminalio.FONT

line_color = 0xFFFFFF

# Setup the first bitmap and sparkline
# This sparkline has no background bitmap
# mySparkline1 uses a vertical y range between 0 to 10 and will contain a
# maximum of 40 items
sparkline1 = Sparkline(
    width=chart_width,
    height=chart_height,
    max_items=40,
    y_min=0,
    y_max=10,
    x=40,
    y=30,
    color=line_color,
)

# Label the y-axis range

text_xoffset = -10
text_label1a = label.Label(font=font, text=str(sparkline1.y_top), color=line_color)  # yTop label
text_label1a.anchor_point = (1, 0.5)  # set the anchorpoint at right-center
text_label1a.anchored_position = (
    sparkline1.x + text_xoffset,
    sparkline1.y,
)  # set the text anchored position to the upper right of the graph

text_label1b = label.Label(font=font, text=str(sparkline1.y_bottom), color=line_color)  # yTop label
text_label1b.anchor_point = (1, 0.5)  # set the anchorpoint at right-center
text_label1b.anchored_position = (
    sparkline1.x + text_xoffset,
    sparkline1.y + chart_height,
)  # set the text anchored position to the upper right of the graph


bounding_rectangle = Rect(sparkline1.x, sparkline1.y, chart_width, chart_height, outline=line_color)


# Create a group to hold the sparkline, text, rectangle and tickmarks
# append them into the group (my_group)
#
# Note: In cases where display elements will overlap, then the order the
# elements are added to the group will set which is on top.  Latter elements
# are displayed on top of former elemtns.

my_group = displayio.Group()

my_group.append(sparkline1)
my_group.append(text_label1a)
my_group.append(text_label1b)
my_group.append(bounding_rectangle)

total_ticks = 10

for i in range(total_ticks + 1):
    x_start = sparkline1.x - 5
    x_end = sparkline1.x
    y_both = int(round(sparkline1.y + (i * (chart_height) / (total_ticks))))
    y_both = min(y_both, sparkline1.y + chart_height - 1)
    my_group.append(Line(x_start, y_both, x_end, y_both, color=line_color))


# Set the display to show my_group that contains the sparkline and other graphics
display.root_group = my_group

# Start the main loop
while True:
    # Turn off auto_refresh to prevent partial updates of the screen during updates
    # of the sparkline drawing
    display.auto_refresh = False

    # add_value: add a new value to a sparkline
    # Note: The y-range for mySparkline1 is set to 0 to 10, so all these random
    # values (between 0 and 10) will fit within the visible range of this sparkline
    sparkline1.add_value(random.uniform(0, 10))

    # Turn on auto_refresh for the display
    display.auto_refresh = True

    # The display seems to be less jittery if a small sleep time is provided
    # You can adjust this to see if it has any effect
    time.sleep(0.01)