# SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
# SPDX-License-Identifier: MIT

import board

import adafruit_ds3502

i2c = board.I2C()  # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
ds3502 = adafruit_ds3502.DS3502(i2c)


#   Steps to test `set_default`:

#   1. Run the program once to see what the current default value is
#   2. Uncomment the call to `setWiperDefault` below and run it again.
#   3. Once the program has run with the `set_default` call,
#       comment out the line below again, then powercycle the DS3502
#       by removing then reattaching VCC
#   4. Then run the program again with the line commented out to see the
#       new default wiper value

# ds3502.set_default(99)


print(f"Default wiper value: {ds3502.wiper:d}")