# SPDX-FileCopyrightText: 2019 ladyada for Adafruit Industries
# SPDX-License-Identifier: MIT

import time
from os import getenv

import board
import busio
import neopixel
from digitalio import DigitalInOut

# Use this import for adafruit_esp32spi version 11.0.0 and up.
# Note that frozen libraries may not be up to date.
# import adafruit_esp32spi
# from adafruit_esp32spi.wifimanager import WiFiManager
from adafruit_esp32spi import adafruit_esp32spi
from adafruit_esp32spi.adafruit_esp32spi_wifimanager import WiFiManager

print("ESP32 SPI WPA2 Enterprise webclient test")

# Get wifi details and more from a settings.toml file
# tokens used by this Demo: CIRCUITPY_WIFI_SSID, CIRCUITPY_WIFI_PASSWORD,
#                           CIRCUITPY_WIFI_ENT_USER, CIRCUITPY_WIFI_ENT_IDENT,
#                           ADAFRUIT_AIO_USERNAME, ADAFRUIT_AIO_KEY
ssid = getenv("CIRCUITPY_WIFI_SSID")
password = getenv("CIRCUITPY_WIFI_PASSWORD")
enterprise_ident = getenv("CIRCUITPY_WIFI_ENT_IDENT")
enterprise_user = getenv("CIRCUITPY_WIFI_ENT_USER")

aio_username = getenv("ADAFRUIT_AIO_USERNAME")
aio_key = getenv("ADAFRUIT_AIO_KEY")

# ESP32 setup
# If your board does define the three pins listed below,
# you can set the correct pins in the second block
try:
    esp32_cs = DigitalInOut(board.ESP_CS)
    esp32_ready = DigitalInOut(board.ESP_BUSY)
    esp32_reset = DigitalInOut(board.ESP_RESET)
except AttributeError:
    esp32_cs = DigitalInOut(board.D9)
    esp32_ready = DigitalInOut(board.D10)
    esp32_reset = DigitalInOut(board.D5)

# Secondary (SCK1) SPI used to connect to WiFi board on Arduino Nano Connect RP2040
if "SCK1" in dir(board):
    spi = busio.SPI(board.SCK1, board.MOSI1, board.MISO1)
else:
    spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
esp = adafruit_esp32spi.ESP_SPIcontrol(spi, esp32_cs, esp32_ready, esp32_reset)

"""Use below for Most Boards"""
status_pixel = neopixel.NeoPixel(board.NEOPIXEL, 1, brightness=0.2)
"""Uncomment below for ItsyBitsy M4"""
# status_pixel = dotstar.DotStar(board.APA102_SCK, board.APA102_MOSI, 1, brightness=0.2)
"""Uncomment below for an externally defined RGB LED (including Arduino Nano Connect)"""
# import adafruit_rgbled
# from adafruit_esp32spi import PWMOut
# RED_LED = PWMOut.PWMOut(esp, 26)
# GREEN_LED = PWMOut.PWMOut(esp, 27)
# BLUE_LED = PWMOut.PWMOut(esp, 25)
# status_pixel = adafruit_rgbled.RGBLED(RED_LED, BLUE_LED, GREEN_LED)

wifi = WiFiManager(
    esp,
    ssid,
    password,
    enterprise_ident=enterprise_ident,
    enterprise_user=enterprise_user,
    status_pixel=status_pixel,
    connection_type=WiFiManager.ENTERPRISE,
)

counter = 0

while True:
    try:
        print("Posting data...", end="")
        data = counter
        feed = "test"
        payload = {"value": data}
        response = wifi.post(
            "https://io.adafruit.com/api/v2/" + aio_username + "/feeds/" + feed + "/data",
            json=payload,
            headers={"X-AIO-KEY": aio_key},
        )
        print(response.json())
        response.close()
        counter += 1
        print("OK")
    except OSError as e:
        print("Failed to get data, retrying\n", e)
        wifi.reset()
        continue
    response = None
    time.sleep(15)