# SPDX-FileCopyrightText: 2017 Tony DiCola for Adafruit Industries
# SPDX-License-Identifier: MIT

# Simple test of the MPR121 capacitive touch sensor library.
# Will print out a message when any of the 12 capacitive touch inputs of the
# board are touched.  Open the serial REPL after running to see the output.
# Author: Tony DiCola
import time

import board
import busio

# Import MPR121 module.
import adafruit_mpr121

# Create I2C bus.
i2c = busio.I2C(board.SCL, board.SDA)

# Create MPR121 object.
mpr121 = adafruit_mpr121.MPR121(i2c)

# Note you can optionally change the address of the device:
# mpr121 = adafruit_mpr121.MPR121(i2c, address=0x91)

# Loop forever testing each input and printing when they're touched.
while True:
    # Loop through all 12 inputs (0-11).
    for i in range(12):
        # Call is_touched and pass it then number of the input.  If it's touched
        # it will return True, otherwise it will return False.
        if mpr121[i].value:
            print(f"Input {i} touched!")
    time.sleep(0.25)  # Small delay to keep from spamming output messages.