# SPDX-FileCopyrightText: 2024
# SPDX-License-Identifier: MIT

import time

import board
from adafruit_display_text.bitmap_label import Label
from displayio import Group
from terminalio import FONT

from adafruit_pm25.i2c import PM25_I2C

# Create sensor object, communicating over the board's default I2C bus
i2c = board.I2C()  # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector
pm25 = PM25_I2C(i2c, reset_pin=None)


# Example written for boards with built-in displays
display = board.DISPLAY

# Create a main_group to hold anything we want to show on the display.
main_group = Group()

# Create a Label to show the readings. If you have a very small
# display you may need to change to scale=1.
display_output_label = Label(FONT, text="", scale=2)

# Place the label near the top left corner with anchored positioning
display_output_label.anchor_point = (0, 0)
display_output_label.anchored_position = (4, 4)

# Add the label to the main_group
main_group.append(display_output_label)

# Set the main_group as the root_group of the display
display.root_group = main_group

# Begin main loop
while True:
    try:
        aqdata = pm25.read()
    except RuntimeError:
        continue
    # Update the label.text property to change the text on the display
    # show some of the values returned by the sensor read, one per line
    display_output_label.text = f"PM 1.0: {aqdata['pm10 standard']} \
        \nPM 2.5: {aqdata['pm25 standard']} \
        \n1.0um / 0.1L: {aqdata['particles 10um']} \
        \n2.5um / 0.1L: {aqdata['particles 25um']}"
    # Wait a bit between reads
    time.sleep(1)