# SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
# SPDX-License-Identifier: MIT

# Simple seesaw test using an LED attached to Pin 5 and a button on pin 2
#
# See the seesaw Learn Guide for wiring details.
# For SAMD09:
# https://learn.adafruit.com/adafruit-seesaw-atsamd09-breakout?view=all#circuitpython-wiring-and-test
# For ATtiny8x7:
# https://learn.adafruit.com/adafruit-attiny817-seesaw/digital-input

import time

import board
import digitalio

from adafruit_seesaw.digitalio import DigitalIO
from adafruit_seesaw.seesaw import Seesaw

i2c = board.I2C()  # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
ss = Seesaw(i2c)

button_pin = 2
led_pin = 5

button = DigitalIO(ss, button_pin)
button.direction = digitalio.Direction.INPUT
button.pull = digitalio.Pull.UP

led = DigitalIO(ss, led_pin)
led.direction = digitalio.Direction.OUTPUT

while True:
    # simply set the LED to the same 'value' as the button pin
    led.value = button.value
    time.sleep(0.1)