# SPDX-FileCopyrightText: Melissa LeBlanc-Williams for Adafruit Industries
# SPDX-License-Identifier: MIT

# This example is for use on (Linux) computers that are using CPython with
# Adafruit Blinka to support CircuitPython libraries. CircuitPython does
# not support PIL/pillow (python imaging library)!
#
# Ported to Pillow by Melissa LeBlanc-Williams for Adafruit Industries from Code available at:
# https://learn.adafruit.com/adafruit-oled-displays-for-raspberry-pi/programming-your-display

# Imports the necessary libraries...
import sys

import board
import digitalio
from PIL import Image

import adafruit_ssd1306

# Setting some variables for our reset pin etc.
RESET_PIN = digitalio.DigitalInOut(board.D4)

i2c = board.I2C()  # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller

# Create the SSD1306 OLED class.
# The first two parameters are the pixel width and pixel height.
# Change these to the right size for your display!
oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c)

# Note you can change the I2C address, or add a reset pin:
# oled = adafruit_ssd1306.SSD1306_I2C(128, 64, i2c, addr=0x3D, reset=RESET_PIN)

# Clear display.
oled.fill(0)
oled.show()

# Open, resize, and convert image to Black and White
image = Image.open(sys.argv[1]).resize((oled.width, oled.height), Image.BICUBIC).convert("1")

# Display the converted image
oled.image(image)
oled.show()