# SPDX-FileCopyrightText: 2021 ladyada for Adafruit Industries
# SPDX-License-Identifier: MIT

"""VC0706 image capture to local storage.
You must wire up the VC0706 to a USB or hardware serial port.
Primarily for use with Linux/Raspberry Pi but also can work with Mac/Windows"""

import time

import board
import busio

import adafruit_vc0706

# Set this to the full path to the file name to save the captured image. WILL OVERWRITE!
# CircuitPython internal filesystem configuration:
IMAGE_FILE = "/image.jpg"
# USB to serial adapter configuration:
# IMAGE_FILE = 'image.jpg'  # Full path to file name to save captured image. Will overwrite!
# Raspberry Pi configuration:
# IMAGE_FILE = '/home/pi/image.jpg'  # Full path to file name to save image. Will overwrite!


# Create a serial connection for the VC0706 connection.
uart = busio.UART(board.TX, board.RX, baudrate=115200, timeout=0.25)
# Update the serial port name to match the serial connection for the camera!
# For use with USB to serial adapter:
# import serial
# uart = serial.Serial("/dev/ttyUSB0", baudrate=115200, timeout=0.25)
# For use with Raspberry Pi:
# import serial
# uart = serial.Serial("/dev/ttyS0", baudrate=115200, timeout=0.25)

# Setup VC0706 camera
vc0706 = adafruit_vc0706.VC0706(uart)

# Print the version string from the camera.
print("VC0706 version:")
print(vc0706.version)

# Set the image size.
vc0706.image_size = adafruit_vc0706.IMAGE_SIZE_640x480
# Or set IMAGE_SIZE_320x240 or IMAGE_SIZE_160x120

# Note you can also read the property and compare against those values to
# see the current size:
size = vc0706.image_size
if size == adafruit_vc0706.IMAGE_SIZE_640x480:
    print("Using 640x480 size image.")
elif size == adafruit_vc0706.IMAGE_SIZE_320x240:
    print("Using 320x240 size image.")
elif size == adafruit_vc0706.IMAGE_SIZE_160x120:
    print("Using 160x120 size image.")

# Take a picture.
print("Taking a picture in 3 seconds...")
time.sleep(3)
print("SNAP!")
if not vc0706.take_picture():
    raise RuntimeError("Failed to take picture!")

# Print size of picture in bytes.
frame_length = vc0706.frame_length
print(f"Picture size (bytes): {frame_length}")

# Open a file for writing (overwriting it if necessary).
# This will write 50 bytes at a time using a small buffer.
# You MUST keep the buffer size under 100!
print(f"Writing image: {IMAGE_FILE}", end="", flush=True)
stamp = time.monotonic()
with open(IMAGE_FILE, "wb") as outfile:
    wcount = 0
    while frame_length > 0:
        t = time.monotonic()
        # Compute how much data is left to read as the lesser of remaining bytes
        # or the copy buffer size (32 bytes at a time).  Buffer size MUST be
        # a multiple of 4 and under 100.  Stick with 32!
        to_read = min(frame_length, 32)
        copy_buffer = bytearray(to_read)
        # Read picture data into the copy buffer.
        if vc0706.read_picture_into(copy_buffer) == 0:
            raise RuntimeError("Failed to read picture frame data!")
        # Write the data to SD card file and decrement remaining bytes.
        outfile.write(copy_buffer)
        frame_length -= 32
        # Print a dot every 2k bytes to show progress.
        wcount += 1
        if wcount >= 64:
            print(".", end="", flush=True)
            wcount = 0
print()
print("Finished in %0.1f seconds!" % (time.monotonic() - stamp))
# Turn the camera back into video mode.
vc0706.resume_video()